Surfboard Wall Mounts: The Complete Guide to Displaying Your Board at Home

Table of Contents Why Mount Your Surfboard on the Wall? Types of Surfboard Wall Mount Choosing Your Wood Finish Where to Display Your Surfboard The NOIR.DESIGN Waves Collection How to Install a Surfboard Wall Mount Caring for Your Wooden Mount Frequently Asked Questions Shop the Collection A surfboard is more than sporting equipment — it’s a piece of design. The curves, the colours, the craftsmanship of a well-made board deserve to be seen, not stacked in a garage or leant against a wall. A quality surfboard wall mount transforms your board into a statement piece: functional art that tells a story about who you are and how you live. At NOIR.DESIGN, our Waves collection of surfboard wall mounts is handcrafted by artisans in England from solid hardwood — oak and walnut — using the same steam-bending techniques that define all our products. This guide covers everything you need to know to choose, position, and install the right mount for your board and your home. 1. Why Mount Your Surfboard on the Wall? There are practical and aesthetic reasons to get your board off the floor and onto the wall: Space saving — Surfboards are long and awkward. Wall mounting reclaims floor space in hallways, bedrooms, and living rooms without sacrificing access to your board. Board protection — Boards stored on the floor or leant against walls are vulnerable to knocks, dings, and UV damage. A wall mount keeps your board secure, supported at the correct points, and away from foot traffic. Interior design — A beautifully shaped board on a quality wooden mount is a genuine design feature. It adds character, colour, and a sense of personality to any room. Conversation starter — Whether it’s a vintage single-fin or a modern performance shortboard, a displayed surfboard invites curiosity and tells your story. 2. Types of Surfboard Wall Mount Horizontal Mounts (Shortboard Racks) Horizontal mounts display your board parallel to the wall, with two arms supporting the board at its widest points. This is the classic display style — ideal for shortboards, fish, and mid-length boards up to around 7–8ft. The board sits close to the wall, making it a clean, minimal display that works in most rooms. Our Walnut Horizontal Mount and Oak Horizontal Mount are designed for shortboards and mid-lengths. Vertical Mounts (Longboard Racks) Vertical mounts display your board nose-up or tail-up, perpendicular to the floor. This is the preferred display style for longboards (8ft+), where the full length of the board becomes a dramatic vertical feature. Vertical mounting also works well in rooms with high ceilings, where the board’s height adds to the sense of scale. Our Waves 2.0 Longboard Mount in Oak and Waves 2.0 in Walnut are designed specifically for longboards. Which Mount for Which Board? Shortboard / Fish / Funboard (under 7ft) — Horizontal mount Mid-length (7–8ft) — Horizontal mount (check arm spacing) Longboard / Malibu (8ft+) — Vertical Waves 2.0 mount SUP / Paddleboard — Contact us for advice on heavy-duty options 3. Choosing Your Wood Finish NOIR.DESIGN surfboard mounts are available in four hardwood finishes. Here’s how to match them to your interior: Natural Oak Warm honey tones with a visible grain. The most versatile finish — suits coastal, Scandi, and natural interiors. Pairs well with white walls, linen, and light wood flooring. Our most popular finish for beach house and living room displays. Walnut Deep chocolate grain with a rich, premium feel. Suits darker, more sophisticated interiors — think moody living rooms, home offices, and boutique hotel aesthetics. The contrast of dark walnut against a white or light grey wall is particularly striking. Intense Black An ebonised oak finish that makes a bold, architectural statement. Ideal for contemporary, industrial, or monochrome interiors. The black finish recedes against dark walls and pops dramatically against white or light surfaces. Nordic White A pale, bleached oak finish with a light Scandinavian feel. Perfect for minimalist, coastal, or all-white interiors where you want the board itself — not the mount — to be the focal point. 4. Where to Display Your Surfboard Living Room The living room is the most popular location for a surfboard display. Position the board on a feature wall — ideally opposite the main seating area so it can be appreciated from across the room. A horizontal shortboard above a sofa or fireplace works particularly well, as does a vertical longboard in a corner or alcove. Bedroom A surfboard above the bed creates a striking headboard alternative. Use a horizontal mount for shortboards and position the board centrally above the bed frame. For longboards, a vertical mount in the corner of the bedroom adds height and drama without dominating the space. Hallway & Entryway A hallway surfboard display makes an immediate impression on anyone entering your home. Vertical mounts work especially well in narrow hallways where floor space is limited. Position the board at eye level or slightly above for maximum impact. Home Office / Studio A surfboard on the wall of a home office or creative studio adds personality and inspiration to a working environment. It signals a lifestyle and a set of values — and makes video calls considerably more interesting. Restaurants, Bars & Hospitality Our mounts are used in surf shops, beach bars, boutique hotels, and restaurants worldwide. A collection of boards displayed together creates a powerful visual feature wall. Multiple mounts can be staggered at different heights for a gallery-style effect. 5. The NOIR.DESIGN Waves Collection Waves 1.0 — Horizontal Shortboard Mounts Our original horizontal mount, designed for shortboards and mid-lengths. Steam-bent hardwood arms cradle the board at its widest points, protecting the rails while displaying the board cleanly against the wall. Available in four finishes: Walnut Horizontal Mount Oak Horizontal Mount Black Oak Horizontal Mount White Oak Horizontal Mount Waves 2.0 — Vertical Longboard Mounts Our second-generation vertical mount, engineered specifically for longboards and larger boards. The extended arm design provides secure support for boards up to 10ft+, while the steam-bent form maintains the elegant aesthetic of the Waves collection. Available in four finishes: Walnut Longboard Mount Oak Longboard Mount Black Oak Longboard Mount White Oak Longboard Mount 6. How to Install a Surfboard Wall Mount Each NOIR.DESIGN mount comes with all fixings included. Here’s the full installation process: Choose your wall position. Hold the mount against the wall and check the position from across the room before marking anything. Consider the height, the surrounding furniture, and the direction of natural light. Mark the fixing points. Use a pencil to mark the screw hole positions. For horizontal mounts, ensure both arms are level using a spirit level. For vertical mounts, ensure the mount is plumb (perfectly vertical). Check for cables and pipes. Before drilling, use a cable detector to check for hidden electrical cables or water pipes behind the wall surface. Drill and plug. Drill at your marked points using the appropriate drill bit for your wall type (masonry or plasterboard). Insert the supplied wall plugs. Fix the mount. Screw the mount to the wall using the supplied screws. Do not overtighten — the screw head should sit flush with the mount surface. Mount your board. Rest the board on the arms and check it is balanced and secure. For longboards on vertical mounts, ensure the board is centred on both arms before releasing. Tip: For very heavy boards or plasterboard walls, we recommend locating a wall stud for at least one of the fixing points, or using heavy-duty plasterboard anchors. 7. Caring for Your Wooden Mount Our hardwood mounts are finished to last, but a little care will keep them looking their best for years: Dust regularly with a soft, dry cloth to prevent build-up in the grain. Avoid direct sunlight for prolonged periods — UV exposure can fade and dry out the wood over time. Condition annually with a small amount of natural wood oil (such as Danish oil or tung oil) to maintain the finish and prevent the wood from drying out. Avoid moisture — our mounts are designed for interior use. Do not install in bathrooms or outdoor spaces without appropriate sealing. Check fixings periodically — especially if the board is frequently removed and replaced. Tighten any screws that have worked loose over time. 8. Frequently Asked Questions What size surfboard will fit on a NOIR.DESIGN mount? Our Waves 1.0 horizontal mounts are designed for shortboards and mid-lengths up to approximately 7–8ft. Our Waves 2.0 vertical mounts are designed for longboards and larger boards from 8ft upwards. If you’re unsure which mount suits your board, contact us with your board dimensions and we’ll advise. How much weight can the mounts hold? Our solid hardwood mounts are engineered to hold standard surfboards safely. Most surfboards weigh between 2–6kg — well within the load capacity of our mounts when correctly fixed to a solid wall. For heavier boards (SUPs, large longboards), we recommend fixing into a wall stud. Will the mount damage my surfboard rails? No. The steam-bent arms of our mounts are shaped to cradle the board’s rails gently without applying pressure to any single point. The smooth, finished wood surface will not scratch or mark your board’s finish. Can I use these mounts outdoors? Our mounts are designed for interior use. For outdoor or high-humidity environments (such as a garage or surf shack), we recommend sealing the wood with an exterior-grade oil or varnish before installation. Do the mounts come with all the fixings I need? Yes — every NOIR.DESIGN mount comes with wall plugs and screws suitable for both masonry and plasterboard walls. Full installation instructions are included. Can I display multiple boards on the same wall? Absolutely. Multiple mounts can be arranged in a gallery-style layout — staggered at different heights and positions for a dynamic display. We recommend leaving at least 30–40cm between boards to allow each one to be appreciated individually and to make removal easy. Are these suitable for a surf shop or commercial space? Yes. Our mounts are used in surf shops, beach bars, boutique hotels, and restaurants. For commercial orders or bulk pricing, please contact us directly. How long does delivery take? Our mounts are handcrafted to order in England. Please check the current lead time on the product page, as this varies with demand. We ship across the UK and internationally. Can I get a custom size or finish? We occasionally take on custom commissions for bespoke sizes or finishes. Contact us to discuss your requirements. 9. Shop the Waves Collection Ready to display your board? Browse the full Waves collection below: Horizontal Mounts (Shortboards & Mid-Lengths) Walnut Surfboard Wall Mount Oak Surfboard Wall Mount Black Oak Surfboard Wall Mount White Oak Surfboard Wall Mount Vertical Mounts (Longboards) Walnut Longboard Wall Mount Oak Longboard Wall Mount Black Oak Longboard Wall Mount White Oak Longboard Wall Mount All mounts are handcrafted to order by our artisan team in England and delivered in premium NOIR.DESIGN packaging.

Surfboard Wall Mounts: The Complete Guide to Displaying Your Board at Home

Leave a comment

Read more